Powermaxx Lube India

DESCRIPTION SYNTHETIC HT LCX-1.5 460 & 680 WT is synthetic grease formulated with advanced technology contains Lithium Complex thickener blended with high viscosity synthetic base oil PAO (PolyAlphaOlefin) & extra tacky for structural stability and resistance to withstand water for better high load carrying. It contains small dosage of synthetic (PAO) ester additives with special white solid lubricants Mox-Active (Organo Molybdenum Complex) a German technology improvement additive creates a passive film on friction surfaces before friction occurs, an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. It antioxidants, anti-corrosion and special EP additives along with compatible friction modifier to deliver outstanding performance in severe application areas like Yaw, Pitch and Main Shaft bearings of Wind Turbines, Steel, Paper & etc. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs. It is specially developed for application areas where slow & medium speed applications working under low & high temperatures at highly stressed anti-friction bearings & rollers bearings operating under water contact or presence is there and gives outstanding performance specially in Wind Turbine bearings. These greases are specially developed for application areas were extensive water contact or presence, vibration & high shock loads are there and gives outstanding performance. Lithium Complex thickener used to maintain their consistency and EP protection even with high levels of industrial & sea salt water contamination. PAO based synthetic greases are composed of 100% synthetic base oil which provides longer lubrication. APPLICATIONS  Versatile applications recommended in Yaw, Pitch and Main Shaft bearings of Wind Turbines, Concaster bearings, Steel Mills, Paper Mill bearings (dry end) Cement Mill journals, Chemical & Textiles Plants, etc.  SYNTHETIC HT LCX-1.5 460 & 680 WT grease lubricating highly stressed anti-friction bearings and heavy duty rollers running operating under the environments at slow or medium rotation speeds, under heavy shock loads and with occasional impact-type loads.  Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.  It can also be used in ambient temperature applications where high resistance to water washing is needed at medium & low speed bearings. It is a pumpable grease when working under high hydraulic pressure generated by the pumps of centralized and Individualized systems.   

DESCRIPTION SYNTHETIC HT LCX-2 150 WT is synthetic grease formulated with advanced technology contains Lithium Complex thickener blended with high quality synthetic base oil PAO (PolyAlphaOlefin) for structural stability and resistance to withstand water for better high load carrying. It contains small dosage of synthetic (PAO) ester additives with special white solid lubricants Mox-Active (Organo Molybdenum Complex) a German technology improvement additive creates a passive film on friction surfaces before friction occurs, an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. It antioxidants, anti-corrosion and special EP additives along with compatible friction modifier to deliver outstanding performance in severe application areas like Yaw, Pitch & Generator bearings of Wind Turbines, Steel, Paper & etc. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs. It is specially developed for application areas where medium & high speed applications working under low & high temperatures at highly stressed anti-friction bearings & rollers bearings operating under water contact or presence is there and gives outstanding performance specially in Wind Turbine bearings. PAO based synthetic greases are composed of 100% synthetic base oil which provides longer lubrication. APPLICATIONS  SYNTHETIC HT LCX-2 150 WT meets most specifications of wind turbines Yaw, Pitch & Generator bearings in Wind turbines, Electric motors bearings especially for high output (horse power): Small medium & Large, high load electric motors, high temperature water pump bearings, sealed for life bearing.  Recommended application temperature range for continuous operation is from -40°C to 160°C.  Antifriction bearings operating at high speed & high temperature (10,000 rpm & greater)  Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use an automatic centralized & Individualized pneumatic pump system, cartridges or grease dispensers. 

DESCRIPTION SYNTH POLYTHERM-1.5 460 & 680 WT is synthetic grease formulated with advanced technology contains Polyurea blended with high viscosity synthetic base oil PAO (PolyAlphaOlefin) for structural stability and resistance to withstand water for better high load carrying. It contains small dosage of synthetic (PAO) ester additives with special white solid lubricants Mox-Active (Organo Molybdenum Complex) a German technology improvement additive creates a passive film on friction surfaces before friction occurs, an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. It antioxidants, anti-corrosion and special EP additives along with compatible friction modifier to deliver outstanding performance in severe application areas like Yaw, Pitch and Main Shaft bearings of Wind Turbines, Steel, Paper & etc. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs. It is specially developed for application areas where slow & medium speed applications working under low & high temperatures at highly stressed anti-friction bearings & rollers bearings operating under water contact or presence is there and gives outstanding performance specially in Wind Turbine bearings. These greases are specially developed for application areas were extensive water contact or presence, vibration & high shock loads are there and gives outstanding performance. Polyurea thickener used to maintain their consistency and EP protection even with high levels of industrial & sea salt water contamination. PAO based synthetic greases are composed of 100% synthetic base oil which provides longer lubrication. APPLICATIONS  Versatile applications recommended in Yaw, Pitch and Main Shaft bearings of Wind Turbines, Concaster bearings, Steel Mills, Paper Mill bearings (dry end) Cement Mill journals, Chemical & Textiles Plants, etc.  SYNTH POLYTHERM-1.5 460 & 680 WT grease lubricating highly stressed anti-friction bearings and heavy duty rollers running operating under the environments at slow or medium rotation speeds, under heavy shock loads and with occasional impact-type loads.  Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.  It can also be used in ambient temperature applications where high resistance to water washing is needed at medium & low speed bearings. It is a pumpable grease when working under high hydraulic pressure generated by the pumps of centralized and Individualized systems. 

DESCRIPTION SYNTHETIC CS HTXX-2 150 WT is synthetic grease formulated with advanced technology contains Calcium Sulfonate Complex thickener blended with high quality synthetic base oil PAO (PolyAlphaOlefin) for structural stability and resistance to withstand water for better high load carrying. It contains small dosage of synthetic (PAO) ester additives with special white solid lubricants Mox-Active (Organo Molybdenum Complex) a German technology improvement additive creates a passive film on friction surfaces before friction occurs, an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. It antioxidants, anti-corrosion and special EP additives along with compatible friction modifier to deliver outstanding performance in severe application areas like Yaw, Pitch & Generator bearings of Wind Turbines, Steel, Paper & etc. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs. It is specially developed for application areas where medium & high speed applications working under low & high temperatures at highly stressed anti-friction bearings & rollers bearings operating under water contact or presence is there and gives outstanding performance specially in Wind Turbine bearings. PAO based synthetic greases are composed of 100% synthetic base oil which provides longer lubrication. APPLICATIONS  SYNTH CS HTXX-2 150 WT meets most specifications of wind turbines Yaw, Pitch & Generator bearings in Wind turbines, Electric motors bearings especially for high output (horse power): Small medium & Large, high load electric motors, high temperature water pump bearings, sealed for life bearing.  Recommended application temperature range for continuous operation is from -40°C to 160°C.  Antifriction bearings operating at high speed & high temperature (10,000 rpm & greater)  Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use an automatic centralized & Individualized pneumatic pump system, cartridges or grease dispensers. 

DESCRIPTION SYNTHETIC CS HTXX-1.5 460 & 680 WT is synthetic grease formulated with advanced technology contains Calcium Sulfonate Complex thickener technology blended with high viscosity synthetic base oil PAO (PolyAlphaOlefin) for structural stability and resistance to withstand water for better high load carrying. It contains small dosage of synthetic (PAO) ester additives with special white solid lubricants Mox-Active (Organo Molybdenum Complex) a German technology improvement additive creates a passive film on friction surfaces before friction occurs, an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. It antioxidants, anti-corrosion and special EP additives along with compatible friction modifier to deliver outstanding performance in severe application areas like Yaw, Pitch and Main Shaft bearings of Wind Turbines, Steel, Paper. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs. It is specially developed for application areas where slow & medium speed applications working under low & high temperatures at highly stressed anti-friction bearings & rollers bearings operating under water contact or presence is there and gives outstanding performance specially in Wind Turbine bearings. These greases are specially developed for application areas were extensive water contact or presence, vibration & high shock loads are there and gives outstanding performance. Calcium Sulphonate Complex thickener used to maintain their consistency and EP protection even with high levels of industrial & sea salt water contamination. PAO based synthetic greases are composed of 100% synthetic base oil which provides longer lubrication. APPLICATIONS  Versatile applications recommended in Yaw, Pitch and Main Shaft bearings of Wind Turbines, Concaster bearings, Steel Mills, Paper Mill bearings (dry end) Cement Mill journals, Chemical & Textiles Plants, etc.  SYNTHETIC CS HTXX-1.5 460 & 680 WT grease lubricating highly stressed anti-friction bearings and heavy duty rollers running operating under the environments at slow or medium rotation speeds, under heavy shock loads and with occasional impact-type loads.  Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.  It can also be used in ambient temperature applications where high resistance to water washing is needed at medium & low speed bearings. It is a pumpable grease when working under high hydraulic pressure generated by the pumps of centralized and Individualized systems.   

DESCRIPTION SYNTHETIC HT LCX-2 150 WT is synthetic grease formulated with advanced technology contains Lithium Complex thickener blended with high quality synthetic base oil PAO (PolyAlphaOlefin) for structural stability and resistance to withstand water for better high load carrying. It contains small dosage of synthetic (PAO) ester additives with special white solid lubricants Mox-Active (Organo Molybdenum Complex) a German technology improvement additive creates a passive film on friction surfaces before friction occurs, an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. It antioxidants, anti-corrosion and special EP additives along with compatible friction modifier to deliver outstanding performance in severe application areas like Yaw, Pitch & Generator bearings of Wind Turbines, Steel, Paper & etc. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs. It is specially developed for application areas where medium & high speed applications working under low & high temperatures at highly stressed anti-friction bearings & rollers bearings operating under water contact or presence is there and gives outstanding performance specially in Wind Turbine bearings. PAO based synthetic greases are composed of 100% synthetic base oil which provides longer lubrication. APPLICATIONS  SYNTHETIC HT LCX-2 150 WT meets most specifications of wind turbines Yaw, Pitch & Generator bearings in Wind turbines, Electric motors bearings especially for high output (horse power): Small & medium high load electric motors, high temperature water pump bearings, sealed for life bearing.  Recommended application temperature range for continuous operation is from -40°C to 160°C.  Antifriction bearings operating at high speed & high temperature (10,000 rpm & greater)  Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use an automatic centralized & Individualized pneumatic pump system, cartridges or grease dispensers. 

DESCRIPTION: SYNTHGEAR-320 WT are premium high performance advanced fully synthetic gear oils specially developed for wind turbines and various types of industrial heavy loaded gearboxes and worm wheel boxes operating under normal to extremely heavy duty conditions. Formulated PAG (Polyalkylene Glycol) /Ester based with high viscosity index synthetic base oil, extra anti-foam (silicon free defoamer) with ester additive and excellent load carrying capacity extreme pressure, anti-oxidant & anti-rust additives. SYNTHGEAR-320 WT oils provide clean-gear performance, excellent extreme pressure and Micro-pitting protection, anti-wear, superior performance across wide temperature range, and provides energy saving opportunities with reduced bulk oil temperatures, smooth operation of the gear drives and up to 2x longer lasting performance. Polyalkylene Glycol (PAG) is 100% synthetic base oil which provides longer lubrication. APPLICATION  Recommended for the gearboxes in wind turbines of all sizes and capacities, especially for heavy loads and high shock loaded gear units, remotely located units and extreme high & low temperature environments.  It is especially recommended for wind turbines applications such as main gear motors for pitch and yaw drives that may be subject to Auxiliary gearboxes, micro pitting, gearbox rolling element bearings, especially heavily loaded gearboxes with surface-hardened tooth metallurgies at high and low speed.  SYNTHGEAR-320 WT is long life synthetic oils range for the lubrication of worm gears, Bevel Helical gears, Planetary gears, Helical gears, Power generation gear drives such as mills and heavily loaded gear drives. 

DESCRIPTION: HT OGG-0 1500 WT is heavy-duty high-performance grease blend with very high viscosity special mineral & synthetic base oil, Metal Complex soap thickener with special EP additive and 12% to 13% solid lubricants for use in a wide range Industrial application. It contains small dosage of synthetic (PAO) ester additives with white solid lubricants Mox-Active (Organo Molybdenum Complex) technology an improvement additive creates a passive film on friction surfaces before friction occurs, optimum wear protection and an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. HT OGG-0 1500 WT has been formulated to environmental protection and engineering norms with special solid lubricants & non-toxic additive with eco-friendly and chemistry provides thicker and stronger film stability, where bearings are exposed to high shock loads and heavy vibration, high temperature & low speed both exist in indoors and outdoors in both cold and high temperature applications and gives high protection by minimizing metal-to-metal contact and reduces friction, wear at minimal consumption. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs. HT OGG-0 1500 WT grease has excellent flow and pump-ability when working under high hydraulic pressure generated by the pumps of centralized and Individualized systems at high temperature and gives excellent lubrication for extended bearings life and gives longer relubrication interval periods and over a wide range of temperatures in Sugar Mills Bearings & Gears applications. FEATURES AND BENEFITS  Extends bearings life and gives longer relubrication intervals.  Excellent extreme-pressure protection load-carrying ability for equipment protection under heavy shock loads & minimizing metal to metal contact with excellent high temperature oil bleed control.  High protection against seizure and wear, avoiding expensive repairs.  High drop point ensures extended operating temperature range up to -20°C to 160°C FORMS OF APPLICATION AND USES  HT OGG-0 1500 WT is predominantly designed for the use on open gears of rotary drum drives, single / double pinion kilns and mill drives, working under severe circumstances. (for example in cement plants, paper mills, Sugar Mills, Wind Mills, Steels & etc…).  HT OGG-0 1500 WT can be used as well on gear teeth and open gears commonly used in the Wind Mill Yaw & Pitch Gear Tooth, Sugar Mill Journal Bearing & large Girth Gears, Steel, Paper & Cement Industry.  HT OGG-0 1500 WT preferably used for excellent flow and pump-ability for automatic centralized & Individualized pneumatic pump/spray system well-adjusted to optimize the quantities of grease sprayed and prevent from any lack of lubrication. Always avoid contamination of the grease by dust and/or dirt when applying.  

DESCRIPTION: CS HTXX OGG-0 1500 WT greases is formulated with advanced Calcium Sulfonate Complex thickener technology for better high load carrying. It contains small dosage of synthetic (PAO) ester additive, special white solid lubricants Mox-Active (Organo Molybdenum Complex) a German technology improvement additive, EP additive, rust and oxidation properties provide friction modifier which creates a passive film on friction surfaces before friction occurs, optimum wear protection and an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads are specifically designed to deliver outstanding performance in severe application areas like Wind Mill (Yaw & Pitch Gear Tooth), Sugar Mill Journal Bearing & large Girth Gear drives, applications. Compared to conventional soap-base thickeners (i.e. Lithium, lithium complex, aluminum, calcium soaps), the Calcium Sulfonate Complex thickener used to maintain their consistency and EP protection even with high levels in water saturated and contamination environments, providing rust protection between long re-lubrication intervals. These greases provide excellent corrosion protection, in these severely wet environments. FEATURES & BENEFITS  Extends bearings life and gives longer relubrication intervals.  Excellent extreme-pressure protection load-carrying ability for equipment protection under heavy shock loads & minimizing metal to metal contact with excellent high temperature oil bleed control.  High protection against seizure and wear, avoiding expensive repairs.  High drop point ensures extended operating temperature range up to -20°C to 250°C (360 F) FORMS OF APPLICATION AND USES  CS HTXX OGG-0 1500 WT is predominantly designed for the use on open gears of rotary drum drives, single / double pinion kilns and mill drives, working under severe circumstances. (for example in cement plants, paper mills, Sugar Mills, Wind Mills, Steels & etc…).  CS HTXX OGG-0 1500 WT can be used as well on gear teeth and open gears commonly used in the Wind Mill Yaw & Pitch Gear Tooth, Sugar Mill Industry Journal Bearing & large Girth Gear drives, Steel, Paper Mill & Cement Industry.  CS HTXX OGG-0 1500 WT preferably used for excellent flow and pump-ability for automatic centralized & Individualized pneumatic pump/spray system well-adjusted to optimize the quantities of grease sprayed and prevent from any lack of lubrication. Always avoid contamination of the grease by dust and/or dirt when applying.  

DESCRIPTION SYNTH HYDRO HVI WT fluids are lubricants for hydraulic systems, vacuum pumps, motors, circulating systems & Wind Turbines Hydraulics systems (Locks, Brakes & Pitch systems) where extreme temperatures or severe applications requires the performance characteristics of synthetic oils. SYNTH HYDRO HVI WT fluids are formulated with 100% synthetic Group-4 base oil stocks combination with anti-rust, antiwear, anti-oxidant and an advanced synthetic Ester additive, highly shear stable polymer to meet the stringent requirements of modern hydraulic systems. Natural resistance to carbon and varnish formations provides for equipment operation with minimum deposits from thermal stresses. FEATURES & BENEFITS  Elimination of carbonaceous and lacquer deposits  Low and high temperature stability (-65 to 240 °C.)  High viscosity index liquid paraffin, Enhanced anti-wear performance Low foaming  Enhanced oxidation & thermal stability, Corrosion protection & Lower coefficient of friction  Air release performance, Filterability performance extended equipment life  Compatibility with conventional seal materials & Less maintenance and down time  Greater bio gradability compared to petroleum products APPLICATION  Recommended for severe service or extreme temperature applications. These include hydraulic systems - ice machines, air compressors – wind turbines and circulating systems. It will also provide extra-long service life in any general purpose system where R & O anti-wear type lubricants are required  Hydraulic and power transmission systems subjected to a wide range of ambient & operating.  Critical hydraulic systems subjected to most severe outdoor operating conditions such as high accuracy numerically controlled machine tools and those employing close clearance servo valves.  Versatile Application in all Wind Turbines. Industrial, Automotive & Construction Hydraulic Equipment’s systems such as Piling Rigs, TBN (Tunnel Boring Machine), Excavators, Cranes and Hydrostatic drives. 

DESCRIPTION SYNTH POLYTHERM-2 150 WT is synthetic grease formulated with advanced technology contains Polyurea thickener blended with high quality synthetic base oil PAO (PolyAlphaOlefin) for structural stability and resistance to withstand water for better high load carrying. It contains small dosage of synthetic (PAO) ester additives with special white solid lubricants Mox-Active (Organo Molybdenum Complex) a German technology improvement additive creates a passive film on friction surfaces before friction occurs, an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. It antioxidants, anti-corrosion and special EP additives along with compatible friction modifier to deliver outstanding performance in severe application areas like Yaw, Pitch & Generator bearings of Wind Turbines, Steel, Paper & etc. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs. It is specially developed for application areas where medium & high speed applications working under low & high temperatures at highly stressed anti-friction bearings & rollers bearings operating under water contact or presence is there and gives outstanding performance specially in Wind Turbine bearings. PAO based synthetic greases are composed of 100% synthetic base oil which provides longer lubrication. APPLICATIONS  SYNTH POLYTHERM-2 150 WT meets specifications of wind turbines Yaw, Pitch & Generator bearings in Wind turbines, Electric motors bearings especially for high output (horse power): Small & medium, high load electric motors, high temperature water pump bearings, sealed for life bearing.  Recommended application temperature range for continuous operation is from -40°C to 160°C.  Antifriction bearings operating at high speed & high temperature (10,000 rpm & greater)  Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use an automatic centralized & Individualized pneumatic pump system, cartridges or grease dispensers. 

DESCRIPTION BIO-SYNTHETIC HYDRO WT series are premium quality, high performance hydraulic oils developed to meet the demand for environmentally acceptable hydraulic fluids lubricants for hydraulic systems, vacuum pumps, motors, circulating systems & Wind Turbines Hydraulics systems (Locks, Brakes & Pitch systems). The products are blended in biodegradable synthetic polyol esters GROUP VI base fluids and a highly specialized ashless non-zinc anti-wear, thermally stable multifunctional additive package which provides the following performance. A high-performance, carefully selected additive package provides excellent anti-wear and extreme pressure (EP) properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance helps to prevent gumming and deposit formation even at high temperatures. Because of the high natural Group-6 base fluid and low pour point, the viscosity temperature behaviour allows for a very wide operating temperature range. Compared to vegetable oil based (HETG) products, HEES (Hydraulic Oil Environmental Synthetic Ester) fluids, such as the BIO SYNTHETIC HYDRO WT series, will give an overall improved performance & in particular related to higher operating temperatures and better thermal and oxidation resistance. BIO-SYNTHETIC HYDRO WT is environmentally accepted hydraulic fluids. FEATURES AND BENEFITS  Reduced friction, lower fuel cost, High temperature stability  Low temperature fluidity, Superior wear protection  Superior shock loading protection  Lower coefficient of friction, Rust & corrosion protection  Compatibility with conventional seal materials  Elimination of carbonaceous and lacquer deposits  Reduced down time, Extended change out intervals  Energy savings, Less maintenance and down time  Greater biodegradability compared to petroleum products  Non Toxic fluid can use at Swimming pool for waves, filtration systems etc.  

DESCRIPTION: TECHGEAR-320 WT are premium high performance fully synthetic gear oils specially developed for wind turbines and various types of enclosed industrial gears operating under normal to extremely heavy duty conditions. Formulated from water soluble PAO (PolyAlphaOlefin) /Ester based with high viscosity index synthetic base oil, extra anti-foam (silicon free defoamer) with ester additive and excellent load carrying capacity extreme pressure, anti-oxidant & anti-rust additives.TECHGEAR-320 WT oils provide clean-gear performance, excellent extreme pressure and micro-pitting protection, anti-wear, superior performance across wide temperature range, and provides energy saving opportunities with reduced bulk oil temperatures, smooth operation of the gear drives and up to 2x long lasting performance. PolyAlphaOlefin is 100% synthetic base oil which provides longer lubrication. APPLICATION  Recommended for the gearboxes in wind turbines of all sizes and capacities, especially for heavy loads and high shock loaded gear units, remotely located units and extreme high & low temperature environments.  It is especially recommended for wind turbines applications such as main gear motors for pitch and yaw drives that may be subject to Auxiliary gearboxes, micro pitting, gearbox rolling element bearings, especially heavily loaded gearboxes with surface-hardened tooth metallurgies at high and low speed.  TECHGEAR-320 WT is long life synthetic oils range for the lubrication of worm gears, Bevel Helical gears, Planetary gears, Helical gears, Power generation gear drives such as mills and heavily loaded gear drives.

DESCRIPTION: OGL-20K FLUIDPRESS Biodegradable is a premium lubricant of a new generation developed specifically for the lubrication of medium-size to large girth gear drives and journal bearings. It is semi synthetic high performance biodegradable organic fluids blend with very high viscosity base oil and synthesized hydrocarbons, resulting in “gel-type” compounds with thixotropic properties, which ensures thicker and stronger film stability form a ring is capable to resist the large heavy loaded in roller mill bearings & large girth gear drives. OGL-20K FLUIDPRESS Biodegradable additive is non-toxic ecofriendly contains small dosage of synthetic (PAO) ester additives with white solid lubricants Mox-Active (Organo Molybdenum Complex) technology an improvement additive creates a passive film on friction surfaces before friction occurs, optimum wear protection and an extremely low coefficient of friction even under extreme pressures, heavy vibrations, heavy shock loads & high temperature at low speed both exist in indoors and outdoors in both cold & high temperature applications and gives high protection by minimizing metal-to metal contact and wear of the friction elements, avoiding seizure & expensive repairs. OGL-20K FLUIDPRESS Biodegradable lubrication has much better and good in performance compared to metallic soap greases because it doesn’t block up pipes, which usually happens because of the oil, soap & solid lubricant separation when working under high hydraulic pressure generated by the pumps of centralized and Individualized systems. It has been formulated to environmental protection engineering norms, it doesn’t contain any bitumen, heavy metals, chlorine and solid particles or any other type of solvents. FEATURES AND BENEFITS  Extends bearings life and gives longer relubrication intervals.  Thermally stable, can withstand high shock loads, and minimizing metal to metal contact  High protection against seizure and wear of the friction elements & avoiding expensive repairs.  High drop point ensures extended operating temperature range upto -20°C to 160°C.  Biodegradable Organic fluid with non-bituminous, non-toxic metal additive and Environment friendly. FORMS OF APPLICATION AND USES  OGL-20K FLUIDPRESS Biodegradable is predominantly designed for the use on open gears of rotary drum drives, single / double pinion kilns and mill drives, working under severe circumstances. (for example in cement plants, paper mills, Sugar Mills, Wind Mills, Steels & etc…).  OGL-20K FLUIDPRESS Biodegradable can be used as well on gear teeth and open gears commonly used in the Wind Mill Yaw & Pitch Gear Tooth, Sugar Mill Industry Journal Bearing & large Girth Gear drives, Steel, Paper Mill & Cement Industry.  OGL-20K FLUIDPRESS Biodegradable preferably used for excellent flow and pump-ability for automatic centralized & Individualized pneumatic pump/spray system well-adjusted to optimize the quantities of grease sprayed and prevent from any lack of lubrication. Always avoid contamination of the grease by dust and/or dirt when applying. 

DESCRIPTION: HD GEARTECH WT high performance gear oil developed for wind turbines and various types of industrial heavy loaded gearboxes and worm wheel boxes operating under normal to extremely heavy duty conditions. Formulated with high quality mineral base oil stocks , extra anti-foam (silicon free defoamer) with ester additive and excellent load carrying capacity, water demulsibility, oxidation stability, corrosion protection and increase long drain intervals to provide optimum equipment protection and oil life even under extreme conditions compare to normal EP gear oil to provide excellent protection against conventional wear modes such as scuffing but also provides a high level of resistance against micropitting fatigue. It also offers the potential for improved lubrication of gearbox rolling element bearings. BENEFITS & FEATURES  Excellent lubricating power. Reduce the coefficient of friction under thin film lubricating conditions.  Great thermal and oxidation stability, Excellent cleanliness for sludge free gear drives at high temperature.  High anti-corrosive & anti-rust power in the presence of humidity.  Highly resistance to the formation of foam and water emulsions.  Limits power loss from friction and makes gears function smoothly, uniformly and silently with low noise.  Increase the useful life of the gears and bearings, Excellent protection against wear by micropitting.  High quality base oil stocks with high viscosity index ensure good lubricant film thickness over a broad temperature range, as a result of its great oxidation stability. APPLICATION  Recommended for the gearboxes in wind turbines of all sizes and capacities, especially for heavy loads and high shock loaded gear units, remotely located units and extreme high & low temperature environments.  It is especially recommended for wind turbines applications such as main gear motors for pitch and yaw drives that may be subject to Auxiliary gearboxes, micro pitting, gearbox rolling element bearings, especially heavily loaded gearboxes with surface-hardened tooth metallurgies at high and low speed.  HD EP GEARTECH WT is long life gear oils range for the lubrication of worm gears, Bevel Helical gears, Planetary gears, Helical gears, Power generation such as mills and heavy loaded gear drives.

DESCRIPTION HYDRO HVI ZF WT fluids are lubricants developed for hydraulic systems, vacuum pumps, motors, circulating systems & Wind Turbines Hydraulics systems (Locks, Brakes & Pitch systems) subjected to wide range of temperature at high pressure or where small viscosity change with fluctuating temperature is required. Formulated with combination of highly refined quality paraffinic base oils Group-3 for HYDRO HVI ZF WT (Zinc Free) grade a highly shear stable polymer and an advanced additive system to meet the stringent requirements of modern hydraulic systems. These oils offer good protection against wear, corrosion, rust formation & prevent high foam building and ageing of the lubricants. Also when these lubricants are exposed to small amounts of water, this hardly influences the filterability of the lubricant. We also provide ZF grade (ZINC FREE) and Ashless Hydraulic Oil in HVI Grades for Extra Extended Drain Interval & Upgrade to AL Technology with Special Base Oil No Heavy Metals, Zinc Free, Good Anti-Foam & Air Release Properties by Using Silicon Free Components APPLICATION  Recommended for severe service or extreme temperature applications. These include hydraulic systems - ice machines, air compressors – wind turbines and circulating systems. It will also provide extra-long service life in any general purpose system where R & O anti-wear type lubricants are required  Hydraulic and power transmission systems subjected to a wide range of ambient & operating.  Critical hydraulic systems subjected to most severe outdoor operating conditions such as high accuracy numerically controlled machine tools and those employing close clearance servo valves.  Versatile Application in all Wind Turbines. Industrial, Automotive & Construction Hydraulic Equipment’s systems such as Piling Rigs, TBN (Tunnel Boring Machine), Excavators, Cranes and Hydrostatic drives.