Wind Turbine Lubricants And Greases

Product Details:

Application:

• Recommended for the gearboxes in wind turbines of all sizes and capacities, especially for heavy loads and high shock loaded gear units, remotely located units and extreme high & low temperature environments.
• It is especially recommended for wind turbines applications such as main gear motors for pitch and yaw drives that may be subject to Auxiliary gearboxes, micro pitting, gearbox rolling element bearings, especially heavily loaded gearboxes with surface-hardened tooth metallurgies at high and low speed.
• Techgear-320 WT is long life synthetic oils range for the lubrication of worm gears, Bevel Helical gears, Planetary gears, Helical gears, Power generation gear drives such as mills and heavily loaded gear drives.

Features & Benefits:

• Excellent lubricating power & reduce the coefficient of friction under thin film lubricating conditions.
• Great thermal and oxidation stability, excellent cleanliness for sludge free gear drives at high temperature.
• High anti-corrosive & anti-rust power in the presence of humidity.
• Highly resistance to the formation of foam and water emulsions.
• Limits power loss from friction and makes gears function smoothly, uniformly and silently with low noise.
• Increase the useful life of the gears and bearings, excellent protection against wear by micropitting.
• High quality synthetic PAO/Ester based (PolyAlphaOlefin) base oil with high viscosity index ensure good lubricant film thickness over a broad temperature range. Due to its synthetic nature, it allows extend long drain interval more than 7 years and improve the reliability of your gearboxes.

Product Details:

Application:

• Recommended for severe service or extreme temperature applications. These include hydraulic systems- ice machines, air compressors – wind turbines and circulating systems. It will also provide extra-long service life in any general purpose system where R & O anti-wear type lubricants are required
• Hydraulic and power transmission systems subjected to a wide range of ambient & operating.
• Critical hydraulic systems subjected to most severe outdoor operating conditions such as high accuracy numerically controlled machine tools and those employing close clearance servo valves.
• Versatile Application in all Wind Turbines. Industrial, Automotive & Construction Hydraulic Equipment’s systems such as Piling Rigs, TBN (Tunnel Boring Machine), Excavators, Cranes and Hydrostatic drives.

Features & Benefits:

• High viscosity index liquid paraffin, Enhanced anti-wear performance Low foaming
• Enhanced oxidation & thermal stability, Corrosion protection & Lower coefficient of friction
• Air release performance, Filterability performance extended equipment life
• Compatibility with conventional seal materials & Less maintenance and down time.

Product Details:

Application:

• Recommended for the gearboxes in wind turbines of all sizes and capacities, especially for heavy loads and high shock loaded gear units, remotely located units and extreme high & low temperature environments.
• It is especially recommended for wind turbines applications such as main gear motors for pitch and yaw drives that may be subject to Auxiliary gearboxes, micro pitting, gearbox rolling element bearings, especially heavily loaded gearboxes with surface-hardened tooth metallurgies at high and low speed.
• Synthgear-320 WT is long life synthetic oils range for the lubrication of worm gears, Bevel Helical gears, Planetary gears, Helical gears, Power generation gear drives such as mills and heavily loaded gear drives.

Features & Benefits:

• Excellent lubricating power & reduce the coefficient of friction under thin film lubricating conditions.
• Great thermal and oxidation stability, excellent cleanliness for sludge free gear drives at high temperature.
• High anti-corrosive & anti-rust power in the presence of humidity.
• Highly resistance to the formation of foam and water emulsions.
• Limits power loss from friction and makes gears function smoothly, uniformly and silently with low noise.
• Increase the useful life of the gears and bearings, excellent protection against wear by micropitting.
• High quality synthetic PAG/Ester based (Polyalkylene Glycol) base oil with high viscosity index ensure good lubricant film thickness over a broad temperature range. Due to its synthetic nature, it allows extend long drain interval more than 7 years and improve the reliability of your gearboxes.

Product Details:

Features & Benefits:

• Elimination of carbonaceous and lacquer deposits
• Low and high temperature stability (-65 to 240 °C.)
• High viscosity index liquid paraffin, Enhanced anti-wear performance Low foaming
• Enhanced oxidation & thermal stability, Corrosion protection & Lower coefficient of friction
• Air release performance, Filterability performance extended equipment life
• Compatibility with conventional seal materials & Less maintenance and down time
• Greater bio gradability compared to petroleum products

Application:

• Recommended for severe service or extreme temperature applications. These include hydraulic systems- ice machines, air compressors – wind turbines and circulating systems. It will also provide extra-long service life in any general purpose system where R & O anti-wear type lubricants are required
• Hydraulic and power transmission systems subjected to a wide range of ambient & operating.
• Critical hydraulic systems subjected to most severe outdoor operating conditions such as high accuracy numerically controlled machine tools and those employing close clearance servo valves.
• Versatile Application in all Wind Turbines. Industrial, Automotive & Construction Hydraulic Equipment’s systems such as Piling Rigs, TBN (Tunnel Boring Machine), Excavators, Cranes and Hydrostatic drives.

Product Details:

Features And Benefits:

• Reduced friction, lower fuel cost, High temperature stability
• Low temperature fluidity, Superior wear protection
• Superior shock loading protection
• Lower coefficient of friction, Rust & corrosion protection
• Compatibility with conventional seal materials
• Elimination of carbonaceous and lacquer deposits
• Reduced down time, Extended change out intervals
• Energy savings, Less maintenance and down time
• Greater biodegradability compared to petroleum products
• Non Toxic fluid can use at Swimming pool for waves, filtration systems etc.

Product Details:

HT OGG-0 1500 WT Yaw & Pitch Tooth Gear Grease is heavy-duty high-performance grease blend with very high viscosity special mineral & synthetic base oil, Metal Complex soap thickener with special EP additive and solid lubricants with 5% Moly & 2% Mox-Active (Organo Molybdenum Complex) designed to deliver outstanding performance in severeapplication areas like Wind Mill (Yaw & Pitch Gear Tooth), Sugar Mill Journal Bearing & large Girth Gear drives, applications for use in a wide range Industrial application. HT OGG-0 1500 WT special solid lubricants additive chemistry provides thicker and stronger film stability, where bearings are exposed to high shock loads and heavy vibration, high temperature & low speed both exist in indoors and outdoors in both cold and high temperature applications and gives high protection by minimizing metal-to-metal contact and reduces friction and wear at minimal consumption. All of this turn reduces maintenance cost and extend the life of equipment and friction elements avoiding seizure & expensive repairs.

Product Details:

Application:

• Recommended for severe service or extreme temperature applications. These include hydraulic systems- ice machines, air compressors – wind turbines and circulating systems. It will also provide extra-long service life in any general purpose system where R & O anti-wear type lubricants are required
• Hydraulic and power transmission systems subjected to a wide range of ambient & operating.
• Critical hydraulic systems subjected to most severe outdoor operating conditions such as high accuracy numerically controlled machine tools and those employing close clearance servo valves.
• Versatile Application in all Wind Turbines. Industrial, Automotive & Construction Hydraulic Equipment’s systems such as Piling Rigs, TBN (Tunnel Boring Machine), Excavators, Cranes and Hydrostatic drives.

Features & Benefits:

• High viscosity index liquid paraffin, Enhanced anti-wear performance Low foaming
• Enhanced oxidation & thermal stability, Corrosion protection & Lower coefficient of friction
• Air release performance, Filterability performance extended equipment life
• Compatibility with conventional seal materials & Less maintenance and down time.

Product Details:

Bio Synthetic Hydraulic Oils are premium quality, high performance hydraulic oils developed to meet the demand for environmentally acceptable hydraulic fluids. The products are blended in biodegradable synthetic polyol esters group vi base fluids and a highly specialized ashless non-zinc anti-wear, thermally stable multifunctional additive package which provides the following performance. A high-performance, carefully selected additive package provides excellent anti-wear and extremepressure (ep) properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance helps to prevent gumming and deposit formation even at high temperatures.Because of the high natural group vi base fluid and low pour point, the viscosity-temperature behaviour allows for a very wide operating temperature range. Compared to vegetable oil based (hetg) products, hees (hydraulic oil environmental synthetic ester) fluids, such as the bio-synthetic hydro hvi series will give an overall improved performance & in particular related to higher operatingtemperatures and better thermal and oxidation resistance. Bio-synthetic hydro hvi is environmentally accepted hydraulic fluids.

Product Details:

Application:

• Recommended for severe service or extreme temperature applications. These include hydraulic systems- ice machines, air compressors – wind turbines and circulating systems. It will also provide extra-long service life in any general purpose system where R & O anti-wear type lubricants are required
• Hydraulic and power transmission systems subjected to a wide range of ambient & operating.
• Critical hydraulic systems subjected to most severe outdoor operating conditions such as high accuracy numerically controlled machine tools and those employing close clearance servo valves.
• Versatile Application in all Wind Turbines. Industrial, Automotive & Construction Hydraulic Equipment’s systems such as Piling Rigs, TBN (Tunnel Boring Machine), Excavators, Cranes and Hydrostatic drives.

Features & Benefits:

• High viscosity index liquid paraffin, Enhanced anti-wear performance Low foaming
• Enhanced oxidation & thermal stability, Corrosion protection & Lower coefficient of friction
• Air release performance, Filterability performance extended equipment life
• Compatibility with conventional seal materials & Less maintenance and down time.

Product Details:

Benefits & Features:

• Excellent lubricating power. Reduce the coefficient of friction under thin film lubricating conditions.
• Great thermal and oxidation stability, Excellent cleanliness for sludge free gear drives at high temperature.
• High anti-corrosive & anti-rust power in the presence of humidity.
• Highly resistance to the formation of foam and water emulsions.
• Limits power loss from friction and makes gears function smoothly, uniformly and silently with low noise.
• Increase the useful life of the gears and bearings, Excellent protection against wear by micropitting.
• High quality base oil stocks with high viscosity index ensure good lubricant film thickness over a broad temperature range, as a result of its great oxidation stability.

Application:

• Recommended for the gearboxes in wind turbines of all sizes and capacities, especially for heavy loads and high shock loaded gear units, remotely located units and extreme high & low temperature environments.
• It is especially recommended for wind turbines applications such as main gear motors for pitch and yaw drives that may be subject to Auxiliary gearboxes, micro pitting, gearbox rolling element bearings, especially heavily loaded gearboxes with surface-hardened tooth metallurgies at high and low speed.
• HD EP Geartech WT is long life gear oils range for the lubrication of worm gears, Bevel Helical gears, planetary gears, Helical gears, Power generation such as mills and heavy loaded gear drives.

Product Details:

Features & Benefits:

• Elimination of carbonaceous and lacquer deposits
• Low and high temperature stability (-65 to 240 °C.)
• High viscosity index liquid paraffin, Enhanced anti-wear performance Low foaming
• Enhanced oxidation & thermal stability, Corrosion protection & Lower coefficient of friction
• Air release performance, Filterability performance extended equipment life
• Compatibility with conventional seal materials & Less maintenance and down time
• Greater bio gradability compared to petroleum products

Application:

• Recommended for severe service or extreme temperature applications. These include hydraulic systems- ice machines, air compressors – wind turbines and circulating systems. It will also provide extra-long service life in any general purpose system where R & O anti-wear type lubricants are required
• Hydraulic and power transmission systems subjected to a wide range of ambient & operating.
• Critical hydraulic systems subjected to most severe outdoor operating conditions such as high accuracy numerically controlled machine tools and those employing close clearance servo valves.
• Versatile Application in all Wind Turbines. Industrial, Automotive & Construction Hydraulic Equipment’s systems such as Piling Rigs, TBN (Tunnel Boring Machine), Excavators, Cranes and Hydrostatic drives.

Product Details:

Features And Benefits:

• Reduced friction, lower fuel cost, High temperature stability
• Low temperature fluidity, Superior wear protection
• Superior shock loading protection
• Lower coefficient of friction, Rust & corrosion protection
• Compatibility with conventional seal materials
• Elimination of carbonaceous and lacquer deposits
• Reduced down time, Extended change out intervals
• Energy savings, Less maintenance and down time
• Greater biodegradability compared to petroleum products
• Non Toxic fluid can use at Swimming pool for waves, filtration systems etc.

Product Details:

Features And Benefits:

• Reduced friction, lower fuel cost, High temperature stability
• Low temperature fluidity, Superior wear protection
• Superior shock loading protection
• Lower coefficient of friction, Rust & corrosion protection
• Compatibility with conventional seal materials
• Elimination of carbonaceous and lacquer deposits
• Reduced down time, Extended change out intervals
• Energy savings, Less maintenance and down time
• Greater biodegradability compared to petroleum products
• Non Toxic fluid can use at Swimming pool for waves, filtration systems etc.

Product Details:

CS HTXX OGG-0 1500 WT Yaw & Pitch Tooth Gear Grease is formulated with advanced Calcium Sulfonate Complex thickener technology for better high load carrying, extreme temperature properties along with compatible friction modifier, EP additive, rust and oxidation inhibitors are specifically designed to deliver outstanding performance in severe application areas like Wind Mill (Yaw & Pitch Gear Tooth), Sugar Mill Journal Bearing & large Girth Gear drives, applications. Compared to conventional soap-base thickeners(i.e. Lithium, lithium complex, aluminum, calcium soaps), the Calcium Sulfonate Complex thickener used to maintain their consistency and EP protection even with high levels in water saturated and contamination environments, providing rust protection between long re-lubrication interv als. These greases provide excellent corrosion protection, in these severely wet environments.

Product Details:

Applications:

• Synth CS HTXX-2 150 WT Yaw & Pitch Generator Bearing Grease meets most specifications of wind turbines Yaw, Pitch & Generator bearings in Wind turbines, Electric motors bearings especially for high output (horse power): Small medium & Large, high load electric motors, high temperature water pump bearings, sealed for life bearing.
• Recommended application temperature range for continuous operation is from -40°C to 160°C.
• Antifriction bearings operating at high speed & high temperature (10,000 rpm & greater)
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use an
• automatic centralized & Individualized pneumatic pump system, cartridges or grease dispensers.

Features, Benefits & Advantages:

• Excellent extreme-pressure protection load-carrying ability for equipment protection under heavy shock loads & minimizing metal to metal contact with excellent high temperature oil bleed control
• Excellent water resistance – means the lubricating film is not washed off even in the presence of water.
• Superior mechanical stability – helps reduce product consumption in high volume applications.
• High dropping point – withstands breakdown in high temperature applications.
• Resists oxidation and prevents corrosive activity on bearings in aggressive process water environments.
• Excellent protection against wear, rust and corrosion- Reduced downtime and maintenance costs
• Excellent pumpability-Reliable lubrication of bearings using centralized grease systems or dispensers.

Product Details:

Applications:

• Synthetic HT LCX-2 150 WT meets most specifications of wind turbines Yaw, Pitch & Generator bearings in Wind turbines, Electric motors bearings especially for high output (horse power): Small medium & Large, high load electric motors, high temperature water pump bearings, sealed for life bearing.
• Recommended application temperature range for continuous operation is from -40°C to 160°C.
• Antifriction bearings operating at high speed & high temperature (10,000 rpm & greater)
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use an automatic centralized & Individualized pneumatic pump system, cartridges or grease dispensers.

Features, Benefits & Advantages:

• Excellent extreme-pressure protection load-carrying ability for equipment protection under heavy shock loads & minimizing metal to metal contact with excellent high temperature oil bleed control
• Excellent water resistance – means the lubricating film is not washed off even in the presence of water.
• Superior mechanical stability – helps reduce product consumption in high volume applications.
• High dropping point – withstands breakdown in high temperature applications.
• Resists oxidation and prevents corrosive activity on bearings in aggressive process water environments.
• Excellent protection against wear, rust and corrosion- Reduced downtime and maintenance costs
• Excellent pumpability-Reliable lubrication of bearings using centralized grease systems or dispensers.

Product Details:

Applications:

• Versatile applications recommended in Yaw, Pitch and Main Shaft bearings of Wind Turbines, Concaster bearings, Steel Mills, Paper Mill bearings (dry end) Cement Mill journals, Chemical & Textiles Plants, etc.
• Synthetic CS HTXX-1.5 680 grease lubricating highly stressed anti-friction bearings and heavy duty rollers running operating under the environments at slow or medium rotation speeds, under heavy shock loads and with occasional impact-type loads.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Features, Benefits & Advantages:

• Excellent extreme-pressure protection load-carrying ability for equipment protection under heavy shock loads & minimizing metal to metal contact with excellent high temperature oil bleed control
• Excellent water resistance – means the lubricating film is not washed off even in the presence of water.
• Superior mechanical stability – helps reduce product consumption in high volume applications.
• High dropping point – withstands breakdown in high temperature applications.
• Resists oxidation and prevents corrosive activity on bearings in aggressive process water environments.
• Excellent protection against wear, rust and corrosion- Reduced downtime and maintenance costs
• Excellent pumpability-Reliable lubrication of bearings using centralized grease systems or dispensers.

Product Details:

Applications:

• Synth Polytherm-2 150 WT meets specifications of wind turbines Yaw, Pitch & Generator bearings in Wind turbines, Electric motors bearings especially for high output (horse power): Small medium & Large, high load electric motors, high temperature water pump bearings, sealed for life bearing.
• Recommended application temperature range for continuous operation is from -40°C to 160°C.
• Antifriction bearings operating at high speed & high temperature (10,000 rpm & greater)
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use an automatic centralized & Individualized pneumatic pump system, cartridges or grease dispensers.

Features, Benefits & Advantages:

• Excellent extreme-pressure protection load-carrying ability for equipment protection under heavy shock loads & minimizing metal to metal contact with excellent high temperature oil bleed control
• Excellent water resistance – means the lubricating film is not washed off even in the presence of water.
• Superior mechanical stability – helps reduce product consumption in high volume applications.
• High dropping point – withstands breakdown in high temperature applications.
• Resists oxidation and prevents corrosive activity on bearings in aggressive process water environments.
• Excellent protection against wear, rust and corrosion- Reduced downtime and maintenance costs
• Excellent pumpability-Reliable lubrication of bearings using centralized grease systems or dispensers.

Product Details:

OGL-20K Fluidpress Biodegradable Pitch Tooth Gear Oil is a premium lubricant of a new generation developed specifically for the lubrication of medium-size to large girth gear drives and journal bearings. It is semi synthetic high performance biodegradable organic fluids blend with very high viscosity base oil and synthesized hydrocarbons, resulting in “gel-type” compounds with thixotropic properties, which ensures thicker and stronger film stability form a ring is capable to resist the large heavy loaded in roller mill’s bearings & large girth gear drives at minimal consumption. OGL-20K Fluidpress Biodegradable provides high shock loads & heavy vibration, high temperature & low speed both exist in indoors and outdoors in both cold and high temperature. OGL-20K Fluidpress Biodegradable lubrication has much better and good in performance compared to metallic soap greases because it doesn’t block up pipes, which usually happens because of the oil, soap & solid lubricant separation when working under high hydraulic pressure generated by the pumps of centralized and Individualized systems. OGL-20K Fluidpress Biodegradable doesn’t contain any bitumen, heavy metals, chlorine and solid particles or any types of solvents.

Product Details:

Applications:

• Versatile applications recommended in Yaw, Pitch and Main Shaft bearings of Wind Turbines, Concaster bearings, Steel Mills, Paper Mill bearings (dry end) Cement Mill journals, Chemical & Textiles Plants, etc.
• Synthetic CS HTXX-1.5 460 grease lubricating highly stressed anti-friction bearings and heavy duty rollers running operating under the environments at slow or medium rotation speeds, under heavy shock loads and with occasional impact-type loads.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Features, Benefits & Advantages:

• Excellent extreme-pressure protection load-carrying ability for equipment protection under heavy shock loads & minimizing metal to metal contact with excellent high temperature oil bleed control
• Excellent water resistance – means the lubricating film is not washed off even in the presence of water.
• Superior mechanical stability – helps reduce product consumption in high volume applications.
• High dropping point – withstands breakdown in high temperature applications.
• Resists oxidation and prevents corrosive activity on bearings in aggressive process water environments.
• Excellent protection against wear, rust and corrosion- Reduced downtime and maintenance costs
• Excellent pumpability-Reliable lubrication of bearings using centralized grease systems or dispensers.