Powermaxx Lube India

DESCRIPTION: RP DW 175, 275, 375 is a premium quality solvent deposited corrosion & rust preventive with excellent dewatering properties. After evaporation of the solvent, the product leaves an ultra-thin greasy protective film. APPLICATIONS  RP DW 175, 275, 375 rapidly removes water from components after electroplating processes, machining with a soluble cutting fluid, or from parts that have been washed. The product can displace water from very intricate assemblies and components.  The very thin residual film provides effective short to medium term protection against corrosion during intermediate storage or transportation.  Although RP DW 175, 275, 375 can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank. BENEFITS & ADVANTAGES  Contains powerful corrosion inhibitor package suitable for moderate conditions which provides reliable protection of components.  Good water displacement and penetrating properties which avoids water entrapment and corrosion under film. Good stability against acidic and alkaline contaminations which enables a long bath lifetime to help reduce operational cost.  Good mechanical film strength and finger print suppressing properties - highly finished work is not damaged by handling which improves component quality.  If required, protective films of RP DW 175, 225, 325 can be removed by using a petroleum solvent or alkaline process cleaner.

DESCRIPTION TDR 90, 110, 140, 240 is superior quality neat oil blended from high flash and low volatility mineral base oils. It is blend of highly chlorinated extreme pressure type oil with fatty oil and sulphur. At the drawing periphery there is a chemical reactivity on the metal surfaces where by the layer of additives are helpful. APPLICATION TDR 90, 110, 140, 240 is ideally suited for most severe drawing applications of stainless steel. It is used for cold pilgering and ensures low wear on mandrel and dies. It is widely used for deep drawing and cold rolling of stainless steel tubes. It is not recommended for cuprous metals and high nickel alloys as it may cause staining. BENEFITS  High oxidation stability, improved die life, High amount of Chlorinated so economy of use fats.  Good internal and external finish, excellent operator acceptance.  Excellent EP package, High lubricity less rejection rate, Low odor and light colour.  Enhanced lubricity package, High degree of internal and external finish so lesser rejection rate.  Reduction in frictional heat hence closer tolerances in manufacturing.  Excellent EP package so very low mandrel and die wear improved mandrel and die life hence reduced.

DESCRIPTION QUENCH P-110 quenching oils permit uniform hardening of steels with minimum distortion and discoloration, while helping improve grain structure and promote long service life. QUENCH P-210 is a highly refined paraffinic mineral oil blended with additives to impart rapid cooling, excellent oxidation stability and extended service life. QUENCH P-310 is dark quench oil containing a highly refined paraffinic mineral oil and an accelerant additive to provide rapid cooling. QUENCH P-410 is made from highly refined paraffinic base oils and is used in quench and marquench operations. QUENCH P-410 is suitable for the production of very hard parts especially where distortion of the quenched parts cannot be tolerated. APPLICATIONS: Quench oil systems FEATURES & BENEFITS • Heat dissipation • Excellent oxidation stability • Corrosion protection • Rust inhibition • Controlled hardness • Reclamation 

DESCRIPTION Sol Cut 100, Super Sol Cut 150 (Fast & Hard Water), Mineral Oil: Long-life Conventional milky emulsion with High-performance, milky soluble fluid providing excellent batch life and lubricity. Designed for long service life and a high degree of lubricity for a range of moderate- to heavy-duty applications. Semi Synthetic Sol Cut-220, Semi Synthetic Sol Cut-250: Semi-synthetic, High-performance multipurpose long-life cutting fluid. Recommended for machining a variety of ferrous and nonferrous metals. Synthetic Sol Cut-320, Synthetic Sol Cut-350. Fully-Synthetic: Fully synthetic (no oil) machining and grinding metalworking fluid for operations where high surface finish, cooling and low foam are primary requirements. Highly stable to provide long service life. APPLICATIONS  General machining of easy to machine steels , aluminum, and copper alloys in light to heavy duty moderate machining operations and Designed for hard water, long service life and a high degree of lubricity for a range of moderate- to heavy-duty applications .  Semi synthetic cutting fluid is High performance, primarily recommended for machining of aluminum, aluminum alloys, steels, easier to machine stainless steels, and cast iron in milling, tuning, sawing, boring, drilling and reaming.  Synthetic (mineral oil-free) fluid for general cutting and grinding operations of ferrous materials from light to severe duty, designed for modern machining equipment and high surface finish.

DESCRIPTION: NEATCUT PLUS is active type neat cutting oil. This oil contains a sulphurised fatty material, which improves oiliness property thus providing better surface finish. Neat cutting Oil is blended with highly refined HVI refined oils and selected oiliness additives to improve the surface adherence properties of various machines. This oil possesses extreme pressure properties. APPLICATIONS NEATCUT PLUS cutting oil is suitable for less severe classes of machining on ferrous metals and is excellent for automatic lathes, screw cutting machines etc, known for its high efficacy and purity. Neatcut plus is recommended for most of the cutting operations on ferrous metals under severe operating conditions, which demand high degree of chemical activity in oils. This oil is suitable for machining operations on high tensile stainless steel as well as Ni-Cr alloys by automatics, gear cutting, hobbing, drilling, reaming and thread cutting machines. To obtain best results with the use of this product, it is necessary that a copious flow of oil at low pressure is maintained at the cutting area. Also, the oil is inexpensive to afford. APPLICATIONS  Recommended for metal cutting and grinding operations.  Recommended for all heavy duty metal working operations.  Recommended for manual and CNC operating machines. 

DESCRIPTION TDR-500 was developed in mineral lubricant especially for use as a lubricant for drawing aluminum. It can be used neat and these lubricants do not interfere with coating. TDR-550 (synthetic) is a partly synthetic lubricant specially intended for the wire drawing, deep drawing and die-cutting of steels, including stainless steel. By using it in progressive dies one can achieve splendid result with a slight impregnation of belt, which minimizes the consumption rates .It protects the equipment against wear and corrosion very effective and it can be easily removed by solvents and alkaline detergent in the hot. This dramatically lowers the coefficient of friction of steel to aluminum, aluminum to aluminum and can also be used on stainless steel, bronze, brass, galvanized steel, titanium and other metals. APPLICATIONS & USAGE Before TDR-500 is charged into a system, machines should be thoroughly cleaned. In order to obtain optimum results from TDR-500, the system must be kept free of moisture. Before TDR-550 is applied by dripping, recirculation, and impregnation with rollers or belt. It is used for deep drawing of all kind of steel wires also. (MOISTURE INCREASES DIE WEAR AND GIVES A POOR SURFACE FINIS--H). Sump temperatures are regulated at 120°F ± 10°F (49± 5 oC). At no time should the temperature be allowed to drop below 85°F (29.4oC) or exceed 150°F (66.0oC). FEATURES & BENEFITS  High oxidation stability.  It provides excellent lubricity  Excellent wear protection.  No corrosion.  Good surface finish